Chevy cobalt oil filter tool

The level should be at the "Max" mark on the dipstick. Add more oil, if needed. Insert the funnel in an empty oil bottle and pour the old oil from the drain pan into the bottle. Close the bottle once it is full. Repeat this step until you transfer all of the old oil from the drain pan to the bottles. Take the old oil and filter to a used oil recycling center, many auto parts stores take old oil free of charge. Justin Cupler is a professional writer who has been published on several websites including CarsDirect and Autos.

Cupler has worked in the professional automotive repair field as a technician and a manager since He has a certificate in broadcast journalism from the Connecticut School of Broadcasting. Cupler is currently studying mechanical engineering at Saint Petersburg College.

Step 1 Open the Cobalt's hood and remove the oil filler cap to provide ventilation while draining the oil. Step 2 Raise the front of the Cobalt with a floor jack and slide jack stands under the vehicle's subframe. Step 3 Crawl under the Cobalt and locate the drain pan on the base of the engine. Step 4 Loosen the drain plug with a combination wrench, and remove the drain plug by hand. Step 5 Wipe the drain plug off with a clean, lint-free cloth and hand-thread the drain plug into the drain hole.

Step 6 Raise the Cobalt from the jack stands, using a floor jack, and remove the jack stands from under the vehicle. Step 7 Locate the oil filter cap, the plastic cap nearly 4 inches in diameter.

Step 8 Loosen the oil filter cap using ratchet and a 32 mm socket, on the 2. Step 9 Remove the tools from the oil filter cap and pull the cap from the oil filter housing. Step 10 Pull the old filter from the oil filter cap. The video displayed may not look exactly like your car, but may be relevant enough for you to get a good idea how to do it.

Sedan 4 Door 1. Getting Started - Prepare for the repair. Share on. Full list of part and tools. Author Hans Angermeier has produced over , videos showing drivers how to fix things on their cars. Check for a blown engine fuse. Sedan 4 Door.

Check your brake fluid. Checking your brake fluid from time to time is a great way to ensure safe stopping. Change an engine fuse.

Move the used oil catch container to below the oil drain bolt before removing it with the 15mm socket by turning it counter clockwise. Tighten it to just past hand tight or about lb ft of torque with the 15mm socket and a torque wrench if you have one.

Lower the car down from the jack stands and floor jack before moving to the engine bay. The next few steps got messy so they are not pictured in this guide. Remove the oil filter cap and separate it from the old cartridge oil filter element. Push a new cartridge filter back on to the cap. It will only go on one way, so you can't get it wrong. If your new filter came with a replacement rubber o-ring, pull the old one off the filter cap and install the new one.

Insert the new filter back into the engine and rotate the cap to just past hand tight. Do not over tighten the filter cap. Replace the oil filler cap, run the engine for a minute, shut it off, and allow it to rest for about five minutes. Check the oil level on the yellow handled dipstick.

Engine Oil Level Dipstick Check Oil Level Replace Oil Filler Cap Be sure to check the oil level on the dipstick at least a few times over the next week and watch your driveway for oil spots that may indicate a leak from the oil drain bolt or oil filter housing. Record the mileage and oil change details in your service record book. To reset the oil life indicator on the driver's instrument panel, press both the information "i" button and display arrow button at the same time for one second before releasing them.

The display will now show "OIl Life Reset". Press and hold the "arrow" button until the display says "acknowledged".